Setting up Vonage D-Link VTA-VR

This guide will help you setup your D-Link Broadband Telephone Adapter
(VTA-VR) from Vonage using Smart Bro connection. This guide also works
on any service provider in North America (VTA-VR) and Canada (VTA-CV).

.

FAQ - UNLOCK DLINK VTA-VR VTA-VC

Requirements

Vonage D-Link VTA-VR - 1 internet/WAN port (rj45), 2 telephone ports
(rj11)
Router with Enabled DHCP (Linksys WRT54GC, Mikrotik RouterOS, Linksys
WRT54G,all D-Link routers etc.)
Touchtone telephone (cord or cordless)

Vonage D-Link VTA-VR Setup Diagram

Connecting Vonage D-Link VTA-VR to the Network

1. Plug in the touchtone telephone to Vonage D-Link VTA-VR’s telephone
port 2

2. Plug in the Vonage D-Link VTA-VR to any of the vacant ports of your
Router with Enabled DHCP

3. Turn on the Vonage D-Link VTA-VR.

4. Once initialized, all LEDs should light up. Pick up the phone and
you should be able to get a dial tone.

You cannot connect Vonage D-Link VTA-VR directly to a smart bro
connection due to device provisioning problem, but there is a workaround
for this, MAC cloning.

Make sure your UNIT "ATA" is disconnected from the internet.  The ATA Must be disconnected from the INTERNET or every time you unlock it, seconds after unlock it will RE-DOWNLOAD the lock "Provisioning"

Cont.

D-Link VTA-VR Unlocking Guide

.